Acrylic is a synthetic material made from acrylic resins with a small proportion of various additives that give it specific properties. In international literature it is referred to as PMMA (polymethyl methacrylate).
Acrylic has a density of 1.19 g/cm3, making it almost 2.5 times lighter than ordinary glass and 17% lighter than rigid PVC. Its impact strength is 5 times that of ordinary glass. The service temperature range of acrylic is from -40°C to +80°C.
Acrylic generally has good resistance to ageing: its mechanical properties and light transmission remain virtually unchanged over time under UV radiation and weathering (acrylic needs no additional UV protection). Acrylic transmits up to 92% of visible light, more than any other polymer. Coloured acrylic may change colour during prolonged outdoor use (this depends on the specific colour and manufacturer).
Acrylic is used in a wide range of fields:
lighting (lamp shades, partitions, front panels, diffusers),
outdoor advertising (face panels for light boxes and illuminated letters, thermoformed 3D products),
retail equipment (stands, displays, price tags),
sanitary ware (bathroom fittings),
construction and architecture (glazing of openings, partitions, domes, dance floors, thermoformed 3D products),
transport (aircraft and boat glazing, fairings),
instrument making (dials, inspection windows, housings, dielectric parts, containers).
Acrylic sheet is produced in two ways: by extrusion and by casting. The production method itself imposes certain limitations and determines some of the properties of the plastic.
The starting material for cast acrylic is liquid methyl methacrylate monomer. In the first stage, additives are mixed into the monomer to colour the sheets or give them special properties, along with hardeners and other components. The cold liquid acrylic mixture is then poured between two special silicate glass plates, placed in a frame and cured, first in water and then in air. Polymerisation produces a solid sheet material, which is trimmed to standard sizes.
Cast acrylic differs from extruded acrylic primarily in its molecular bonds, which are stronger in cast acrylic. This shows above all in its thermal and chemical properties, impact resistance and the way the material behaves during processing.
Because of the way it is made, cast acrylic comes in a much wider range and in a virtually unlimited range of thicknesses, while extruded acrylic is made from 1.5 to 24 mm. Cast acrylic has higher impact strength (it has a "cross-linked" molecular structure), better chemical resistance, polishes better than extruded acrylic and is more reliable in thermoforming (it is less sensitive to uneven heating, shrinks less and is less affected by stress concentrators).
Compared with extruded acrylic, cast acrylic also has the following characteristics:
sheets are shorter than the maximum length of extruded sheets,
better sheet surface finish,
poorer bondability,
higher thermoforming temperatures and a wider thermoforming temperature range (approx. 160–190°C versus 150–170°C for extruded),
greater forming force required,
lower shrinkage on heating (2% versus 6% for extruded),
products can be re-formed.
Acrylic is highly flammable, but when burning it is less hazardous than other combustible plastics, as it does not give off toxic gases. Its ignition temperature is 260°C.
Acrylic is an environmentally friendly material: it releases no toxic substances and is completely safe. It can be used outdoors and indoors, including in children's and medical facilities. Acrylic is fully recyclable.
Acrylic has good water resistance and good resistance to alkalis and aqueous solutions of inorganic salts. It is attacked by dilute hydrofluoric and hydrocyanic acids, as well as by concentrated sulphuric, nitric and chromic acids.
Solvents for acrylic include chlorinated hydrocarbons (dichloroethane, chloroform), aldehydes, ketones and esters. Acrylic is also attacked by alcohols: methyl, butyl, ethyl and propyl. Brief exposure to 10% ethyl alcohol has no effect on acrylic.