A 550x850 mm customer information board with four A4 pockets, made of laminated chipboard. The pockets differ: two are full format width and two are narrower, all with a tab cut-out at the top. The different widths are not decorative: the narrow pockets take items that are narrower in format too, such as coupons, leaflets and short notices.
| Overall size: | 550x850 mm |
| Material: | Chipboard |
| Pockets: | 4 pcs A4 |
| Pocket type: | raised pocket or flat pocket |
| Print method: | ORACAL film appliqué |
| Chipboard colour: | Chipboard palette, 14 finishes |
| Choosing colours: | available for orders of 8 boards or more |
| Film colour: | Oracal 641 film, 60 colours |
| Mounting: | keyhole hangers |
Tab cut-out at the top of the pocket
The tab exposes the edge of the sheet in the middle, not at the corner. The document is pulled out by the middle of its edge, so it does not crease diagonally or tear when the pocket is packed full. A flat pocket is made of clear PVC 0.8 mm, a deep one of 1.8 mm acrylic, 1.5 cm deep.
Narrow vertical board
At 550 mm wide, the board fits a narrow wall section, between a door and a corner, or the end of a shelving unit. The four pockets run upwards one above the other, and the order of documents is set when you put them up. The base is laminated chipboard with a finish from the palette, so the board can be matched to the furniture.
Finish from eight boards
A finish from the chipboard palette is available in this format for orders of eight boards or more. The header film comes from the Oracal 641 palette.
Mounted on keyhole hangers. Used in small shops, service points, offices and corridors.
- The chipboard finish and pocket type are chosen when you order.
- Production time 3-7 days.
Composition:
Flat pocket; Expandable pocket
Chipboard colour:
White; Black; Aluminium; Anthracite; Blue; Green; Red; Yellow; Artwood Light; Sonoma Oak; Lyon Walnut; Dark Walnut; Appalachian Oak; Concrete Stone