School Board Set

This school set of three panels takes up a full 2200x880 mm of wall. The two side panels, 750x880 mm each, carry headings and six pockets apiece; the centre panel, 610x800 mm, carries a motto with pockets beneath it. The set is hung in a single row, turning the wall into a designed information block rather than a collection of separate signs.

Three panels instead of one large one

A three-part set fits a wall of any length: the panels go edge to edge or with gaps, so the block can be fitted around piers and sockets. A single 2200 mm wide panel does not give that freedom, and it is harder to get into the room.

Eighteen pockets in two formats

Twelve A4 pockets hold full-size documents: timetables, notices, rules, lists. Six A5 pockets are for short messages and section labels. The different formats themselves divide the content into main and secondary, with no extra markings on the panel.

Full-surface printing

The background, headings, decorative elements at the bottom of the panels and the motto in the centre are printed together with the panel at 1440 dpi. The print can be laminated if you wish — the lamination takes the touching and wiping.

Artwork requirements for the set are in the article on print-ready artwork, and the approval procedure in the article artwork approval rules.

• The plastic thickness and lamination are chosen when you order.
• You can send your own artwork or order a design.
• Production time 3-7 days.