PVC Door Sign Plate with Insert, 250x120mm

Door sign 250 mm wide and 120 mm high on a 3 mm PVC plastic base. The lettering is plotter-cut from film and applied to the base, so the letter edges stay crisp and the colour is even across the whole area.

What we print and how

• Appliqué: the outline is plotter-cut from coloured film, with the colour chosen from Oracal 641 film, 60 colours.
• Artwork must be vector only — how vector differs from raster.

How to choose the size

The size is chosen to fit the text, not the other way round: first decide how many lines you need and how long they are, then pick the format. Landscape formats suit a single line, portrait formats suit a job title and surname.

How it is mounted

• Double-sided tape on the back of the sign
• Double-sided tape on the front (for glass doors)
• Screws

Tape fails not because of the adhesive but because of poor contact: on textured plaster it only touches the peaks of the relief. Degrease the wall and give the adhesive a day to reach full strength; on rough surfaces use self-tapping screws.

Changeable information

The insert slides out and is replaced without taking the sign off the wall. This is handy wherever the content changes more often than the sign itself: offices, classrooms, meeting rooms.

You can also order the insert from us — plastic in various thicknesses.

Care

PVC is an indoor material: in direct sunlight white turns yellow. Abrasives, acetone and solvents are unsuitable for any of the materials.

These signs go on office and meeting room doors in offices, clinics, schools and salons — anywhere rooms need to be marked consistently across a whole floor.

• Minimum order: 1 pc.
• The price drops for larger runs
• For an exact price, use the Quote button
• Production time 3-7 days