Inclined Display Shelf 340x375x100mm

Sloping display stand, 340x375x100 mm. Two levels of sloping shelves with a raised front edge; the sides continue downwards and turn into outward-curving runner feet. The slope turns the front of the product towards the shopper, and vertical braces between the shelves keep the structure rigid.

The slope and the lip work together

On a sloping shelf without a lip, products slide down on their own. The raised front edge catches the bottom edge of the packaging, so the slope can be noticeable — just enough for the front to be read from the aisle rather than from above.

Runner feet instead of legs

The outward-curving feet spread the weight along the full length of the table instead of concentrating it on four points. On a glass display shelf this matters: point supports leave marks and need pads, runners do not.

Thickness to suit the display weight

• a thin sheet is enough for light packaging;
• for heavy products a thicker sheet is used, otherwise the sloping shelf flexes;
• the wider the stand, the longer the unsupported span of the shelf between the sides.

Care

Acrylic is softer than glass, and it is cleaning that damages it: glass cleaner with ammonia leaves a web of microcracks that cannot be polished out. A soft cloth, warm water and a drop of detergent are all you need; wipe damp — caring for acrylic products.

The stand is designed for a counter, a display case and a shop shelf. It is bent and cut from acrylic sheet; the clear material does not compete with the products — the display stays in the frame, not the structure.

Production time: 3-7 days.