3-Step Product Riser, H=210mm, L=330mm

Product riser with 3 steps, H=210 mm, L=330 mm. One-piece bent construction with three horizontal steps, solid sides and an open back. Narrow lip strips run along the front edge of the steps — they stop products sliding forward, which the two-step series do not have.

Front-edge lip

On a step without a lip, packaging creeps towards the edge with every touch, and within a day the display is out of line. A narrow strip catches the bottom edge of the product and keeps the row in place, while covering only the very bottom of the packaging.

Three levels in a compact height

The spacing between steps is small, so three rows fit into a height comparable to a two-step riser. This is a display for small items — bottles, little boxes, accessories — where the number of levels matters more than the clearance above each one.

Dimensions

• H — overall height of the riser, fixed for the series;
• L — length along the shelf, chosen by variant;
• B — depth: the option sets the overall depth of the riser and the depth of each step.

Care

Acrylic is softer than glass, and it is cleaning that damages it: glass cleaner with ammonia leaves a web of microcracks that polishing cannot remove. Use warm water, a mild detergent and a soft cloth; wipe damp — caring for acrylic products.

The riser works in a display case, on a counter and on a shop shelf. It is bent from a single sheet of acrylic with no joins; the clear material is barely noticeable in the display.

Production time: 3-7 days.