Plastic Information Board, 10mm PVC

A PVC plastic information board is a single sheet with no frame: the image is applied directly to the plastic, so no separate backing is needed. The versions in the series differ only in PVC thickness — from 2 to 10 mm. The size is not fixed: the sheet is cut to fit the section of wall where the board will go.

Printing vs appliqué: what's the difference

Printing gives full colour: photos, logos, diagrams and small text go onto the sheet with no limit on the number of shades. Appliqué works differently — the colour is already in the film itself, and the design is cut along its outline, so it is used for solid backgrounds and large lettering rather than fine graphics. In this case, the background shade is chosen from a palette; there is a link to it in the table.

Lamination is optional — film is applied over the print to protect it.

Kit contents: pockets and cork area

• Clear pockets for changeable documents — A4 size, A5 size or A6 size; they are fixed with double-sided tape.
• A cork finish is a separate order option and covers the whole sheet: notices and schedules are held with pins and can be changed every day if you like.
• The permanent part is the header with a title: it is printed or applied in film directly onto the sheet, while changeable information goes into the pockets or onto the cork.

These boards are used in schools, shops, shopping centres and all kinds of organisations — wherever you need a permanent header with a title and space for changeable information. Any size is possible, so the sheet is made to fit a specific stretch of wall between doors. Mounting — keyhole hangers.

• Series code: 21-11010.
• The series has 5 versions, differing in PVC thickness: 2, 3, 4, 6, 10 mm.
• Made-to-order size: tell us the width and height of the wall space, and the sheet will be cut to those dimensions.
• Specify the print method: printing or film appliqué, and whether you need lamination.
• Cork area — tick it in your order if needed.
• Production time 3-7 days.