The 800x1090 mm clear board with nine A4 pockets has no background at all: the wall it hangs on shows through the 4 mm acrylic. So this board does not clash with the room finish: it adds no patch of colour to the wall and simply brings the documents forward. The pockets are arranged in a three-by-three grid and held on standoff screws, with a gap from the panel.
| Overall size: | 800x1090 mm |
| Material: | clear acrylic 4 mm |
| Pockets: | 9 pcs, A4 format, depth 8 mm |
| Pocket material: | clear acrylic 1.8 mm |
| Print method: | Oracal films or 3D letters made of coloured acrylic, including metallic and pearlescent |
| Type: | all pockets the same or one pocket smaller |
| Base material options: | Altuglas coloured acrylic palette, 25 options |
| Film colour: | Oracal 641 film, 60 colours |
| Mounting: | decorative fixings, standoff fixings or self-tapping screws |
Why the pockets have a gap from the panel
The pocket is not screwed down flush but through a standoff spacer. The sheet slides into the slot freely without catching on the screw, and the pocket itself casts a shadow on the clear panel, creating a pattern of light and shadow stripes on the wall that a flat board does not have.
Clear or coloured acrylic base
The base is clear by default, but you can order it in coloured acrylic: 25 options, including metallic, pearlescent and translucent. A clear base disappears on the wall; a coloured one turns the board into a surface with a background.
How the header is applied
There are two ways. Oracal film is cut to the outline of the artwork and applied to the acrylic, giving a flat lettering in an even colour. 3D acrylic letters are applied as separate pieces and add depth and shadow; in metallic and pearlescent finishes they read as metal.
How it is hung
Three options to choose from: decorative standoff fixings, 4 pieces, so the board hangs with an air gap; ordinary decorative fixings without standoff; self-tapping screws, when the fixings should not be visible. Clear acrylic needs careful handling; there is a separate article on caring for acrylic products.
These boards are used in offices, showrooms, clinics and reception areas, where the wall is already finished and any coloured board would look out of place.
- The base material, print method and mounting are chosen when you order.
- Production time 3-7 days.
Application method:
ORACAL films; 3D letters (coloured acrylic); 3D letters (metallic or pearlescent acrylic)
Fixings:
Self-tapping screws; Decorative fixing element (4 pcs); Decorative stand-off fixing element (4 pcs)
Base material:
Clear acrylic; Opal acrylic; Acrylic Black (10000); Acrylic Grey (48007); Acrylic Burgundy (22003); Acrylic Dark red (22002); Acrylic Red (22013); Acrylic Orange (25001); Acrylic Raspberry (22007); Acrylic Cream (21013); Acrylic Lemon (21011); Acrylic Yellow (21003); Acrylic Turquoise (23010); Acrylic Bright blue (23003); Acrylic Blue (23000); Acrylic Light blue (23008); Acrylic Green (24015); Acrylic Lime green (24003); Acrylic Brown (S-814); Metallic acrylic GOLD SATIN; Metallic acrylic SILVER SATIN; Metallic acrylic PEARL; Metallic acrylic GOLD 69004; Acrylic translucent (27014); Acrylic bronze smoked translucent (16065)