Customer Information Board with 4 Pockets, 550x850mm (Composite Material)

This 550x850 mm customer information board with four A4 pockets is a narrow vertical panel in 3 mm ACM. At just over half a metre wide, it fits where a wide board would not: between a door and a corner, on the end of a shelving unit, in a gap by the entrance.

Four documents in a column

The pockets run one above another, and the order is set when you fill them: what is read most often goes at the top, and what has to be displayed but is rarely looked at goes at the bottom.

What the pockets are made of

Flat pocket — clear PVC 0.6 mm: the sheet is pressed against the panel and read through the plastic. Raised pocket — acrylic 1.8 mm, 1.5 cm deep, holding a selection rather than a single document. The pocket joint is covered by a coloured edge strip: it holds the edge of the clear tray and hides the seam.

Film design

The panel and header are decorated with Oracal film appliqué — cut elements are applied to the ACM. Colours are taken from the Oracal 641 palette, and the panel itself from the ACM colour range. The artwork has to be vector.

It goes in small shops, service points, at branch entrances and on narrow corridor walls. Mounted on keyhole hangers.

• The pocket type and ACM colour are chosen when you order.
• Artwork for film cutting has to be vector.
• Production time 3-7 days.