Customer Information Board with 10 Pockets, 1300x850mm (Composite Material)

This 1300x850 mm customer information board with ten A4 pockets is built on a 3 mm aluminium composite panel. The pockets are not glued on: slots are cut in the panel and the trays slot into them. So the layout can be changed — take out a tray, move it to another slot, add or remove one, without remaking the panel.

Trays fit into slots

Through-slots in the panel hold each pocket by its flange. This has two consequences: a tray can be removed for cleaning or replacement, and the board itself can be rearranged for a new set of documents when the contents change.

What ACM is

An aluminium composite panel is two thin aluminium sheets with a polymer core between them. Its face is smooth and flat, so cut film goes on without bubbles.

Film appliqué, not printing

The design is assembled from cut Oracal film: background, header with the heading, stripes. The colour is solid, from the palette, and the artwork has to be vector — the film is cut along curves, and a raster image will not do. The difference between the formats is covered in the article vector or raster graphics.

It goes in sales floors, supermarkets, branches and reception areas — wherever the required set of documents is large and all of it has to be on one wall. Mounted on keyhole hangers.

• The pocket type and ACM colour are chosen when you order.
• You can send your own artwork or order a design.
• Production time 3-7 days.