Acrylic + Two-Layer Plastic Door Sign Plate, 200x70mm

Door sign 200 mm wide and 70 mm high on a base of clear acrylic and 4 mm two-layer plastic. The image is laser-ablated to the depth of the top layer, so it cannot be rubbed off or scratched — it is not paint on the surface.

What we print and how

• UV ink goes straight onto the material and cures instantly under UV light: there is no film layer and colours are not limited to a palette.
• Laser engraving removes the top layer, revealing the colour of the material itself in the design — it cannot be rubbed off.
• Both raster and vector artwork will do — the difference between vector and raster.

How to choose the size

The size is chosen to fit the text, not the other way round: first decide how many lines you need and how long they are, then pick the format. Landscape formats suit a single line, portrait formats suit a job title and surname.

How it is mounted

• Double-sided tape
• Decorative fixing element (2 pcs)
• Decorative standoff fixing (2 pcs) — standoff fixing that holds the sign away from the wall
• Screws

Tape fails not because of the adhesive but because of poor contact: on textured plaster it only touches the peaks of the relief. Degrease the wall and give the adhesive a day to reach full strength; on rough surfaces use self-tapping screws.

Care

Never clean acrylic with glass cleaner: ammonia causes crazing, a network of micro-cracks that clouds the surface for good. Use soapy water and a microfibre cloth without pressing; more in caring for acrylic products. Abrasives, acetone and solvents are unsuitable for any of the materials.

These signs go on office and meeting room doors in offices, clinics, schools and salons — anywhere rooms need to be marked consistently across a whole floor.

• Minimum order: 1 pc.
• The price drops for larger runs
• For an exact price, use the Quote button
• Production time 3-7 days