2-Step Product Riser, H=270mm, L=250mm

Product riser with 2 steps, H=270 mm, L=250 mm. Two steps spaced further apart in height than in the other series, giving a noticeable vertical gap between the rows. These proportions suit a riser that stands on its own and serves not as a row divider but as a two-level podium in its own right.

Two steps as a podium

When the gap between levels is large, the rows no longer read as a continuation of each other. The top step becomes the focal point and the lower one a backdrop for it. This is how you display a single model with accompanying items, rather than a range in a row.

Dimensions

• H — overall height, fixed for the series;
• L — length along the shelf, chosen by variant;
• B — step depth, a separate option to suit the depth of the product.

How it is made

The product is bent from a single sheet of acrylic, with no joints or add-on parts. A clear bend shows the sheet was fully heated; a whitish line along the bend means the opposite.

The edges are polished: on a clear product the edge is visible right through, and a matt sawn cut would show along the full height of the side.

The back is still left open: you can see straight through the riser, so it does not turn into a blank wall in the middle of the display case.

Care

Ordinary glass cleaner is not suitable for acrylic: ammonia damages the surface irreversibly. Warm water with a drop of mild detergent and a lint-free cloth is enough; wipe while damp — see acrylic product care.

The riser is used in display cases, on podiums and at the back of shop shelves, where customers look up at it.

Production time: 3-7 days.