3-Step Riser, H=240mm, L=150mm

Riser with 3 steps, H=240 mm, L=150 mm. Three horizontal steps with narrow upturned lips along the front edge, solid sides and an open back. The spacing between levels is greater than in the smaller three-step series, leaving clearance above each step for packs of noticeable height.

Clearance above the step

The number of steps decides nothing on its own: if the product is taller than the clearance, the top row will rest on the packs below. Here the spacing is designed for medium-height packs — jars, tubes and boxes that will not fit in a compact three-level riser.

A lip instead of dividers

• the upturned lip along the front edge stops the row from sliding off;
• the steps themselves are solid, with no compartments — the spacing of the display is set by the retailer, not by the equipment;
• the sides are solid and support the whole structure.

Dimensions

H — overall height, fixed for the series. L — length along the shelf, chosen as an option. B — depth, a separate option: it sets both the overall depth of the riser and the depth of each step.

Care

Glass cleaner does irreversible damage to acrylic: ammonia leaves a network of micro-cracks that polishing will not remove. Clean with warm water, a mild detergent and a soft cloth, and always while damp, because dry wiping charges the surface with static and attracts dust. What else matters — acrylic product care.

The riser is designed for display cases and shop shelves where products are displayed in three rows. It is bent from sheet acrylic along a heated line, with no joints or add-on parts.

Production time: 3-7 days.