Flip Information Display System 1000x1200mm

The 1000x1200 mm flip information system is built for a large volume of documents: eight fixed A4 pockets on the board plus one to three flip panels, each with another eight pockets. In total, from 16 to 32 A4 documents in one spot on the wall.

A panel, not a single page

What flips here is not one sheet but a whole panel with eight pockets. One movement reveals eight documents at once — this is how you get a capacity that would otherwise take up the whole wall.

One to three panels

The number of panels is chosen when ordering. With one panel the system holds 16 pockets, with three — 32. The overall size of the board stays the same; only the thickness of the assembled block on the axis at the right edge increases.

Board design

At the top there is a header with a title, at the bottom a coloured stripe. The image is applied with printed ORACAL film, meaning the design is printed on the film rather than assembled from cut-out elements, so you can use a photograph and complex graphics.

Mounted on keyhole hangers. What the file you send should contain is covered in the article on print-ready artwork, and the approval procedure in the article artwork approval rules.

• The number of panels, base thickness and frame are chosen when ordering.
• Production time 3-7 days.