Wall-Mounted A4 Flip Display System 620x410mm

A 610x410 mm wall-mounted flip system with two ring mechanisms, on the left and on the right. The board is landscape, and the two blocks sit side by side rather than one above the other: both sets of documents are at the same height and equally easy to reach. The pockets have a semicircular cut-out at the top for gripping the sheet.

Two blocks side by side

The mechanisms are placed at the edges of the board, and each block's pages turn towards their own side without touching the neighbouring block. This board is hung above a desk or counter where there is room in width but little in height.

Semicircular cut-out

The arc in the top edge of the pocket exposes the middle of the sheet. Your finger goes into the cut-out, and the document lifts out straight without creasing diagonally, as happens when a sheet is pulled by the corner.

Kit contents

The number of pockets is 10, 12 or 14, your choice. The base is 4 or 6 mm thick; six millimetres is used when both blocks are assembled with the maximum number of pages. The frame is aluminium — silver, gold or a coloured finish in one of 60 colours — or there is no frame at all.

Mounted on keyhole hangers. File requirements are set out in the article on print-ready artwork, and the approval procedure in artwork approval rules.

• The number of pockets, PVC thickness and frame are chosen when ordering.
• Production time 3-7 days.