Felt-Tip Pen Holder with 52 Cells 20x20mm

The 20x20 mm stand takes thick bodies: the cell here is square, 20x20 mm. The sloped top panel is pierced with them throughout, a base shelf with a turned-up edge runs underneath, and the markers stand at an angle with their tips resting on it.

20x20 mm square cell

A square's diagonal is longer than its side, so a cylindrical body sits in it at four points without wobbling, while a faceted one goes in flat to flat. The format is designed for thick markers and calligraphy pens that are too big for a narrow elongated cell. Check the size against the widest marker you display.

U-shaped body

The top panel and the bottom shelf are joined by side walls into a single bracket. This shape keeps the distance between the levels without internal posts, and the space under the panel stays open: markers are visible from the side, not just from above. The bracket is also stiffer than a flat panel of the same thickness.

Fifty-two places

• The grid covers the whole panel, with no empty margins.
• The slope turns the caps towards the customer.
• The turned-up edge of the shelf stops the bodies sliding down.

Acrylic care

Wash with warm water and a mild detergent using a soft damp cloth. Through cells do not clog, but dust settles under the sloped panel, so check there when cleaning. Ammonia-based glass cleaners are not suitable for acrylic. More in acrylic care.

Use it in an art shop, a stationery department or on a stand with sketching markers. Material: clear acrylic, laser cutting and heat bending.

Production time: 3-7 days.