Clear Pen Holder for 9 pcs, 160x60x85mm

The 160x60x85 mm stand is bent into a horseshoe: a top arc with holes and a bottom base of the same outline are joined by a wall along the inner radius. Nine pens stand in a fan along the arc, turned towards the customer — in a straight row they would all face one way, and half of them would be seen at an angle.

The arc turns every item

On a straight strip, items stand parallel: anyone approaching from the side sees them end-on. The arc turns each socket to its own angle, so from any point in front of the stand at least part of the row faces the customer. For a display on the corner of a counter, this is decisive.

Two stands fit together

The outer and inner radii match, so two identical stands can be placed end to end to form a wave or a ring. The display grows as needed instead of being bought for the maximum straight away — and it still does not look like a collection of random items.

Recesses instead of through-holes at the bottom

• The pen tip sits in a blind recess and does not slide about.
• The base stays solid, so it is easier to clean.
• Nothing falls through onto the shelf under the stand.

Caring for bent acrylic

Curved surfaces are easier to clean than corners: there is nowhere for dust to collect. Warm water, a mild detergent and a soft damp cloth. Ammonia-based glass cleaners are unsuitable for acrylic — the micro-cracks they cause are irreversible. In detail — acrylic product care.

The stand is placed on the corner of a counter, a display shelf or a collection desk. The slot takes a barrel up to 12 mm. Material: clear acrylic, bent from a single sheet.

Production time: 3-7 days.