Pen, Pencil and Marker Holder for 20 pcs, 320x70x60mm

The 20-pc tray is a row of angled slots: the pen tip sits in a recess at the bottom, the body rests in a semicircular cut-out in the back panel, and the whole display stands at the same angle. The pens face the customer rather than the ceiling, so the print on the body can be read without picking up the sample.

Three capacities for different shelf widths

• for 3 pcs: a short tray for a small spot by the till;
• for 10 pcs: a practical width for a stationery display case;
• for 20 pcs: a long row for a continuous display.

Choose a capacity with some room to spare: in a tray packed to the limit, a pen cannot be taken out without touching its neighbours, and the customer simply walks past.

12 mm hole and bottom recess

The slot is designed for the body of a standard pen or marker up to 12 mm in diameter. The recess at the bottom does not go all the way through: it holds the tip and keeps it from sliding, and the lip along the front edge stops the item slipping out if the tray is moved along the counter.

How to keep it clear

Wash acrylic with warm water and a mild detergent, and wipe with a soft damp cloth. Glass cleaners containing ammonia must not be used: they cause irreversible clouding in the form of a network of micro-cracks. Dry wiping is also harmful, as static draws the dust back. In detail: caring for acrylic products.

The tray goes on the counter of a stationery department, a print shop desk or a reception desk with branded pens. How to fit it into the overall display: see the article how to design a shop window display.

Production time: 3-7 days.