Acrylic Pen Holder for 5 pcs, 120x100x50mm

The 120x100x50 mm stand holds five pens in three planes at once: the tip rests on the base, the barrel passes through a slot in the sloping panel and the top through a hole in the shelf. The item is held along its whole height, so it does not wobble or slide, even if the stand is knocked.

The slot shows the whole barrel

In a solid cup you only see the cap. Here the middle panel has elongated windows, and the pen barrel is visible through them along its full length — the lettering, colour and texture can be read without taking the sample out. For products with a print, this is the difference between "standing there" and "on show".

Five slots — a compact display

• It takes up a footprint just bigger than a hand.
• It fits on a narrow shelf or the corner of a stand.
• It can be lined up with others of the same kind — the display grows as needed.

Why angled rather than upright

An upright item shows the customer its end: the cap, the clip and nothing else. The sloping plane turns the barrel towards the room, and from normal height both the colour and the print are visible. The angle is set by the geometry of the bend, it is the same for all five slots and does not shift when some of the sockets are emptied.

How to wash it so it does not cloud

Warm water, a mild detergent and a soft cloth, always damp. Glass cleaners containing ammonia leave a network of micro-cracks on acrylic: the surface clouds over and polishing cannot save it. Details — acrylic product care.

Five slots is the right size for a checkout area, a desk or a small display case with souvenir stationery. The holes take a barrel up to 12 mm. The body is clear acrylic, bent from a single sheet, with no glued seams.

Production time: 3-7 days.