Plastic Pen Holder for 5 pcs, 100x85x120mm

The 100x85x120 mm stand holds each pen with two uprights — a front one and a back one. The item lies in the semicircular notches of both at once and is supported along its axis rather than at a single point, so it does not rotate or topple when the next slot is emptied.

Paired uprights for every slot

A single notch holds an item only where it touches. The pen rocks in it, and by evening the row has lost its line. A pair of uprights spreads the support along the length: the position is set by two points and holds until the item is taken out. The difference shows on a display that gets handled all day.

A slope instead of upright

An upright pen shows its end, a tilted one shows its barrel. The base panel slopes towards the customer, and from normal height you can see the colour, the texture and whatever is printed on the barrel. The angle is the same for all five slots: it is set by the geometry, not by how the item was put in.

Feet along the bottom edge

• Small feet raise the body above the surface.
• The stand does not slide on a smooth counter.
• There is a gap between the body and the counter top, so dust does not build up underneath.

Acrylic care

Wash with warm water and a mild detergent, and wipe with a soft damp cloth. Glass cleaners containing ammonia are unsuitable for acrylic: they leave an irreversible network of micro-cracks. In detail — acrylic product care.

Five slots is the right size for a checkout shelf, a stationery display case or a manager's desk. The slot takes a barrel up to 12 mm. Material: clear acrylic.

Production time: 3-7 days.