Marker Organiser with 81 Cells 20x20mm

The 20x20 mm organiser is designed for thick bodies: the cell here is 20x20 mm rather than elongated. Two parallel walls form a gap between them, the front one is pierced with through cut-outs, and the marker stands upright, resting on both surfaces at once.

20x20 mm cell: when you need it

Thick markers, tubes and wide calligraphy pens simply do not fit into a narrow elongated cell. A 20x20 mm square cell takes them easily without letting them wobble: a square's diagonal is longer than its side, so a cylinder sits snugly at four points. Check the size against the widest body in your range, as the cell cannot be adjusted after production.

Gap between the walls

The back wall runs parallel to the front one a short distance behind it. A body that passes through a cut-out rests against it and cannot fall backwards: it is held by two surfaces rather than the edge of one hole. As a result the row stands straight, without leaning in different directions.

Eighty-one places

• The grid of cut-outs covers the whole panel, with no empty margins.
• Upright placement takes up a strip of the counter rather than an area.
• The whole row is visible from one spot, with no need to sort through the display.

Acrylic care

Wash with warm water and a mild detergent using a soft damp cloth. Through cells do not trap dirt, but the gap between the walls should be rinsed through. Ammonia-based glass cleaners are ruled out: they cloud acrylic irreversibly. More in acrylic care.

Use it in an art shop, a stationery department or on a stand with sketching markers. Material: clear acrylic, laser cutting and heat bending.

Production time: 3-7 days.