Lipstick and Mascara Display for 12 pcs 180x75x85mm

The 180x75x85 mm stand is built as a two-step ladder: each shelf has a row of 20 mm holes, and the back row is raised above the front. Twelve lipsticks stand upright and none blocks its neighbour, so customers see all the caps at once.

20 mm hole: which tube it fits

The hole diameter is the first thing to check against your product. Twenty millimetres is designed for a standard lipstick tube; slim lip gloss will wobble and tip over in a hole like this, and a wide foundation bottle simply won't fit. The diameter can't be adjusted after production, so check it before ordering.

Two steps instead of one level

On a flat surface the front row blocks the back one, and half the display is wasted. The step raises the second row high enough for both to be visible: customers can tell the shades apart without moving the tubes by hand. It also saves counter depth, as the rows stand right next to each other with no gap.

Curved edges

• The front edges curve smoothly downwards and act as feet.
• No sharp edge at hand level.
• The body is bent from a single sheet, with no joints or glue.

Care

Lipstick leaves greasy marks on the edges of the holes, and they show up immediately on clear acrylic. Clean with warm water, a mild detergent and a soft damp cloth; ammonia-based glass cleaners cause an irreversible network of micro-cracks. Details in caring for acrylic products.

Used in cosmetics department display cases, on beauty salon counters and on tester stands. Material: clear acrylic.

Production time: 3-7 days.