Lipstick Display for 8 pcs, 205x100x70mm (D=20mm)

The 205x100x70 mm stand is bent into a step from a single sheet: two channel shelves with 20 mm holes are offset in both height and depth. Eight lipsticks stand in two rows, with the back row set further back so it doesn't compete with the front one for counter space.

Offset in depth, not just in height

An ordinary step raises the second row but leaves it directly above the first. Here the upper shelf is also moved back, so there is a gap between the rows: your hand reaches the back tube without knocking the front one. On a tester display, where products are picked up and put back dozens of times a day, this makes a real difference.

Channel shelf with folded-down edges

Each shelf is bent into a U-profile with the edges folded down. This profile is stiffer than a flat sheet and doesn't sag under a row of bottles, while the folded edges also hide the bottoms of the tubes and make the row look even.

20 mm slot

• Designed for a standard lipstick tube.
• Slim lip gloss wobbles in it, and a wide case won't fit.
• Check the diameter against your product before ordering.

Care

Clean with warm water, a mild detergent and a soft damp cloth. Less gets inside the channels than into an open box, but the edges of the holes get just as greasy from cosmetics. Ammonia-based glass cleaners are not suitable for acrylic. Details in caring for acrylic products.

Used in cosmetics department display cases, on beauty salon counters and on tester stands. Material: clear acrylic, bent from a single sheet.

Production time: 3-7 days.