Lipstick Display for 7 pcs, 200x25x65mm (D=20mm)

This 200x25x65 mm stand is just two and a half centimetres deep: a narrow strip with 20 mm slots, its edges bent down to act as feet. Seven lipsticks stand in two offset rows, and on the counter the stand takes up only a strip along the edge.

Offset rows on a narrow strip

Two rows one behind the other will not fit at this depth: there is not enough room. The slots are staggered, and the tubes in the back row show through the gaps between the front ones. This gives a second display line where physically there is room for only one.

20 mm slot

The size is designed for a standard lipstick tube. This is the dimension to check before ordering: a slim lip gloss will wobble in the slot and tip over, and a wide case will not fit. The diameter cannot be adjusted after production.

When you need a narrow profile

• A shelf by the till with only a few centimetres to the edge.
• A display case whose depth is taken up by other goods.
• A strip display along a wall or along the glass.

Care

Wash with warm water, a mild detergent and a soft damp cloth. Greasy marks from cosmetics on the slot edges show up at once on clear acrylic. Ammonia-based glass cleaners cause an irreversible web of micro-cracks. Full guide: caring for acrylic products.

It goes on the checkout shelf of a cosmetics department, a narrow shop window sill or a tester stand. Material: clear acrylic, bent from a single sheet.

Production time: 3-7 days.