Plastic Smartphone Stand, 65x90x70mm

Smartphone stand, 65x90x70 mm. A solid smooth inclined surface turns through a bend into the base, forming a Z-shaped profile. There is no separate ledge: the stop is formed by the bend itself, and the bottom edge of the device rests right in the fold line. Material: acrylic, also known as plexiglass, a clear rigid plastic that does not cloud under display lighting.

Z-profile with no extra parts

Every extra ledge or rib adds a face to the silhouette that catches glare from the display lighting. Here there are none: three surfaces, two bends and not a single add-on part. What remains behind the phone is a thin line, not a structure.

Stop formed by the bend

• the bottom edge of the device rests in the fold line, not on a separate strip;
• the bottom edge of the phone stays visible, including the port and speaker;
• nothing can break off: the stand has no parts other than the sheet itself.

Thickness to suit the phone's weight

The angle is held by the springiness of the sheet rather than a mechanical stop, so thickness matters more than usual here. For heavy models, choose a thicker sheet: a thin Z-profile gradually straightens under the weight and the incline is lost.

Care

Glass cleaner leaves an irreversible network of micro-cracks on acrylic: ammonia attacks the surface, and polishing will not remove it. Warm water with a drop of mild detergent and a lint-free cloth, used wet, is all you need: caring for acrylic products.

The stand goes on the counter and in the display case of a mobile phone shop, electronics or accessories department. It is bent from acrylic sheet along heated lines.

Production time: 3-7 days.