"Neck" Jewellery Display for 6 Pendants 160x230mm

The 160x230 mm stand holds six pendants from the sides rather than from the top: open notches are cut along both edges of the panel, and each chain is stretched between them across the piece. The jewellery hangs spread out rather than bunched into a loop.

Notches along the side edges

An ordinary stand hangs a chain from the top edge, so it folds in half. Here the ends are fixed on opposite edges and the necklace stretches across the full width of the panel, showing both the centrepiece and how the links are spaced along its length. For pieces with several inserts, this is the only way to show the design.

Six levels in a row

The notches come in pairs at different heights, so the pendants sit in tiers one below the other. None hides its neighbour, yet the panel stays narrow and does not eat up the display. You never have to take the display apart to see the bottom piece.

An open notch, not a closed slot

• The chain slips in from the side, with no need to thread the end through.
• A piece can be taken off with one hand without disturbing its neighbours.
• The edge is rounded and does not bend fine links.

Care

Wash with warm water, a mild detergent and a soft damp cloth. The notch edges rub against metal most often, so wipe them without pressing. Ammonia-based glass cleaners leave an irreversible network of micro-cracks on acrylic. More details: caring for acrylic products.

Used in jewellery department display cases, on necklace and chain counters and on fair stalls. Material: acrylic, bent from a single sheet with a flat foot.

Production time: 3-7 days.