Clear Five-Plate Stand 190x120x58mm

A clear stand for five plates, overall size 190x120x58 mm. It is bent from one continuous strip of acrylic: a row of linked U-shaped arches on a common flat base, with plate cells between the arches. Five places in a single line take up the same shelf depth as one plate.

Five plates across, not deep

Stacked plates cannot be shown: only the top rim is visible. Standing on edge in a row, they can all be seen at once, and the customer does not have to take anything apart to look at the third one from the bottom.

What holds them

• the walls of neighbouring arches hold the plate from both sides;
• the common base keeps the row from spreading apart;
• the end arches are wider than the rest and support the whole strip.

The plate is held by the side walls of its cell, so the stand has no shelves or lips covering the front.

How to match the tableware

The deciding dimension is rim thickness: it should go into the cell freely but without play. It makes sense to build a row from plates of one type, otherwise different rim thicknesses will make the spacing uneven.

How it is made and how to care for it

The piece is bent from a single strip of acrylic: the arches run as one continuous profile with no joints.

Ammonia-based glass cleaner leaves an irreversible network of micro-cracks on acrylic. Wash with warm water, a mild detergent and a soft cloth, and wipe damp: caring for acrylic products.

The stand is designed for tableware shop display cases and decorative plate displays where a long, even row is needed.

Production time: 3-7 days.