Plate Stand 120x150x200mm for 4 Plates

A stand for four plates, overall size 120x150x200 mm. A horizontal base, a solid front panel and two rows of vertical divider ribs with shaped cut-outs at the top: the ribs divide the base into cells, and the front panel works both as a lip and as a space for lettering.

Ribs instead of a solid wall

A solid wall with slots holds a plate at one point. Separate ribs with cut-outs grip it above and below the edge, so the plate sits more firmly in its cell and does not turn when the next one is taken out.

Front panel for a logo

The solid front panel is the only flat surface of the piece, and it faces the customer directly. The shop name or logo goes on it, and the panel also holds the bottom edges of the plates.

What can be applied

• laser engraving: the design is cut into the acrylic and does not wear off;
• single-layer film application: a colour image applied to the surface;
• no decoration: the panel stays clear.

The method is chosen when you order. Film application and engraving need vector artwork: print-ready artwork requirements. On film specifically: how to apply Oracal film.

Care

Glass cleaner leaves a network of micro-cracks on acrylic, irreversibly. Warm water with a drop of mild detergent and a lint-free cloth, used damp, are all you need. Do not rub the area with the film application hard: caring for acrylic products.

The stand is designed for display cases and counters in tableware shops where the display carries the shop's own brand.

Production time: 3-7 days.