Mobile Phone Stand with Price Tag, 55x120mm

Mobile Phone Stand with Price Tag, 55x120mm. A one-piece bent sheet: a sloping back flows smoothly into two flared side wings, with a horizontal shelf at the bottom and a bent-up front lip. The wings are not decorative – they take the sideways load when the phone is lifted one-handed.

Wings instead of flat sides

A straight side keeps the back in one plane. A wing that widens towards the bottom works like a gusset: the lower it goes, the wider the support, so the sloping back does not lean sideways under load or work loose over time.

What holds the phone

• the sloping back sets the screen viewing angle;
• the bent-up front lip takes the bottom edge;
• the horizontal shelf at the bottom leaves room for a price tag level with the product.

Thickness to suit the phone's weight

The sheet thickness is chosen to suit the weight of the phone and the height of the back: the taller the back, the longer its free span from the base and the more noticeably a thin sheet flexes when the phone is lifted.

Care

Glass cleaner causes irreversible damage to acrylic: ammonia leaves a network of micro-cracks that cannot be polished out. Warm water with a drop of mild detergent and a lint-free cloth is enough; wipe while damp, as dry wiping charges the surface with static and attracts dust. More tips – acrylic product care.

The stand belongs on counters and in display cases in phone shops and electronics and accessories departments. It is bent from a single sheet of acrylic: the smooth transitions come from bending along a heated line, not from assembling parts.

Production time: 3-7 days.